FNB38 firmware.  Please upgrade the latest version firmware. （Author:FNIRSI）
-----------------------------------------------------------------------------------------------------
2019-12-24: V1.00
First firmware.

-----------------------------------------------------------------------------------------------------
2020-02-29: V1.10
Fix known issues.

-----------------------------------------------------------------------------------------------------
2020-03-20: V1.20
Fix the restart problem when PD protocol is triggered.

-----------------------------------------------------------------------------------------------------
2020-05-29: V1.30
1. Add the setting to close the startup screen;
2. Add the setting to close the CC pull-down;
3. Changed the judgment logic during fast charge identification;
4. In v1.20 version, some testers D + and D- are displayed as 0V, this version is corrected;
5. During the fast charge test, it supports the display of PD protocol power and the number of PDO, 
   and increases the test of BC1.2 and APPLE2.1A / 2.4A;
6. Add PD monitoring function;
7. Add PD E-Marker function;
8. Add QC2.0->PD protocol conversion function.

-----------------------------------------------------------------------------------------------------
2020-07-17: V1.40
1. Fix the bug that the key is invalid after the key is pressed in the detection;
2. Add a "power-on trigger" switch to the settings，This function is used to:
When "Power-on Trigger" is turned off, unplug the tester directly on the trigger page, and will not directly enter the trigger after reinserting the tester.

-----------------------------------------------------------------------------------------------------
2020-09-10: V1.50
Fix some compatibility issues in fast charge detection and triggering

-----------------------------------------------------------------------------------------------------
2021-01-28: V1.60
Change Huawei FCP, SCP and Samsung AFC drivers to achieve better compatibility.

-----------------------------------------------------------------------------------------------------
2021-03-10: V1.70
Fix the issue that clearing statistics is invalid in V1.60 version.

-----------------------------------------------------------------------------------------------------
2021-04-29: V1.80
When detecting certain chargers, the PD cannot be triggered when the tester is connected to an external power source. 
The reason is that some chargers first supply 5V without brain power, and will power off when PD is detected, and then supply power again, 
which is incompatible with the original detection logic.
Therefore, this version is compatible with this type of charger.

-----------------------------------------------------------------------------------------------------
2021-08-03: V1.90
When some chargers trigger PD, they need to be re-plugged. Fix this problem.

-----------------------------------------------------------------------------------------------------
2021-10-22: V2.00
Fix some problems.



-----------------------------------------------------------------------------------------------------
中文请往下看
-----------------------------------------------------------------------------------------------------
Fnb38最新固件  请升级最新版本固件 （作者：FNIRSI）
-----------------------------------------------------------------------------------------------------
2019-12-24: V1.00
第一版固件。

-----------------------------------------------------------------------------------------------------
2020-02-29: V1.10
修复已知的问题。

-----------------------------------------------------------------------------------------------------
2020-03-20: V1.20
修复PD协议触发时重启的问题。

-----------------------------------------------------------------------------------------------------
2020-05-29: V1.30
1、添加关闭开机画面的设置；
2、添加关闭CC下拉的设置；
3、更改了快充识别时的判断逻辑；
4、v1.20版本时，部分测试仪D+、D-显示为0V，此版本更正；
5、快充检测时，支持显示PD协议的功率及PDO数量，增加BC1.2、APPLE2.1A/2.4A的检测；
6、添加PD监听的功能；
7、添加PD E-Marker功能；
8、添加QC2.0->PD的协议转换功能。


-----------------------------------------------------------------------------------------------------
2020-07-17: V1.40
1、修复检测中按按键后按键失效的BUG；
2、设置里增加一个“上电触发”的开关，此功能用于：“上电触发”关闭时，在触发页面直接拔除测试仪，
重新插入测试仪后不会直接进入触发。

-----------------------------------------------------------------------------------------------------
2020-09-10: V1.50
修复快充检测及触发里的某些兼容性问题

-----------------------------------------------------------------------------------------------------
2021-01-28: V1.60
更改华为FCP、SCP及三星AFC驱动，以达到更好的兼容性。

-----------------------------------------------------------------------------------------------------
2021-03-10: V1.70
修复V1.60版本里，清除统计数据无效的问题。

-----------------------------------------------------------------------------------------------------
2021-04-29: V1.80
当检测某些充电器时，测试仪外接电源时无法触发PD。原因在于，某些充电器先无脑供电5V,检测到PD时会断电，然后再供电，与原本检测逻辑不兼容。
因此，此版本兼容此类充电器。

-----------------------------------------------------------------------------------------------------
2021-08-03: V1.90
部分充电器触发PD时，需要重插拔。修复这个问题。

-----------------------------------------------------------------------------------------------------
2021-10-22: V2.00
修复一些问题。
